| Properties Applicable for 1.5 mm thick material as per) | ASTMF104 |
| Density) | 1.7-2.2gm/cm3 |
| Tensile Strenght) | >24.0 Mpa. |
| Compressibility) | 7-14% |
| Recovery) | >50% |
| Stress Relaxation) | 23.0 Mpa. |
| Ignition Loss) | <28% |
| FLUID ABSORPTION) | --- |
| Water) | |
| Mass Increase) | <10% |
| In ASTM OIL No.3) | |
| Thickness Increase) | <10% |
| Mass Increase) | <15% |
| In FUEL B) | |
| Thickness Increase) | <10% |
| Mass Increase) | <10% |
| In IRM 903) | |
| Thickness Increase) | |
| Mass Increase) | |
| Sulphuric Acid (96%)) | |
| Thickness Increase) | |
| Tensile Strength Decrease) | |
| Nitric Acid (95%)) | |
| Thickness Increase) | |
| Tensile Strength Decrease) | |
| Peak Temp oc) | 450 |
| max. Operating Pressure Kg/cm2) | 50 |
Ferolit 'F'
Ferolit 'F'
-For low medium to high stress conditions.
-For motor oil, Transmissions and hydraulic fluids, low temp oil, steam alcalies anti freeze, refrigerating oil
-High oil and fuel resistance
Specification Compliance
DIN : 3574 IT - O
ASTM:F104 F 112121 M7
JIS:r 3453(1985) Type-3