| Properties Applicable for 1.5 mm thick material as per) | IS 2712/1998 |
| Density) | 1.7-2.2gm/cm3 |
| Tensile Strenght) | >6.7 Mpa. |
| Compressibility) | 6-14% |
| Recovery) | >40% |
| Stress Relaxation) | --- |
| Ignition Loss) | <28% |
| FLUID ABSORPTION) | --- |
| Water) | |
| Mass Increase) | |
| In ASTM OIL No.3) | |
| Thickness Increase) | |
| Mass Increase) | |
| In FUEL B) | |
| Thickness Increase) | |
| Mass Increase) | |
| In IRM 903) | |
| Thickness Increase) | |
| Mass Increase) | |
| Sulphuric Acid (96%)) | |
| Thickness Increase) | |
| Tensile Strength Decrease) | |
| Nitric Acid (95%)) | |
| Thickness Increase) | |
| Tensile Strength Decrease) | |
| Peak Temp oc) | 380 |
| max. Operating Pressure Kg/cm2) | 35 |
Ferolite '333'
Ferolite '333'
-For Low and medium stress conditions.
-For Water, Steam, air and various alkanline chemiclas.
Specification Compliance
IS 2712/1998 Grade W/3