| Properties Applicable for 1.5 mm thick material as per) | IS 2712/1998 |
| Density) | 1.9-2.2 gm/cm3 |
| Tensile Strenght) | > >26.0 Mpa. |
| Compressibility) | 6-14% |
| Recovery) | >40% |
| Stress Relaxation) | >23 Mpa |
| Ignition Loss) | <26% |
| FLUID ABSORPTION) | --- |
| Water) | |
| Mass Increase) | <10% |
| In ASTM OIL No.3) | |
| Thickness Increase) | <25% |
| Mass Increase) | <20% |
| In FUEL B) | |
| Thickness Increase) | <20% |
| Mass Increase) | <20% |
| In IRM 903) | |
| Thickness Increase) | |
| Mass Increase) | |
| Sulphuric Acid (96%)) | |
| Thickness Increase) | |
| Tensile Strength Decrease) | > |
| Nitric Acid (95%)) | |
| Thickness Increase) | |
| Tensile Strength Decrease) | |
| Peak Temp oc) | 600 |
| max. Operating Pressure Kg/cm2) | 200 |
Ferolite 'IGV'
Ferolite 'IGV'
-For high stress conditions.
-Close wire mesh insertion.
-For motor oil, transmissions ans hydraulic fluids, low temp. oil, steam alcalies, anti freeze, refrigerating oil
-For air, water, fuels, alcohols, IC Engines.
Specification Compliance
NO STANDARD EXIST FOR WAIR REINFORCED SHEETS